Tel:0317-6393001
E-mail:hbshenghai@shenghaipipe.com
  |  EN

scaffolding coupler




Product Specifications:
1. Raw Material: Q235;
2. Drop Forged;
3. Pipe diameter: 48.3mm or as per your requirements;
4. Certifies: BS 1139, EN 74 and ISO 9001: 2000;
5. Surface treatment: Electro galvanized, Hot dip galvanized, or painted;
6. Package: woven plastic bags and steel trays.
Main Business:
1. System scaffolding:
Include: Kwikstage system scaffolding and accessories; Ring lock system scaffolding and accessories; Cup lock system scaffolding and accessories; Haki system scaffolding and accessories.
2. Couplers/Clamps:
We can manufacture all kinds of couplers, include: British type couplers, Italian type couplers, German type couplers, American type couplers, and many other kinds of couplers as per your drawings.
3. Frames
Mainly include: Ladder type frames and walk through (door type) frames, we can also manufacture as per your drawings.
4. Shoring Props
Quality shoring props of different specifications can be manufactured in our factory.
5. Planks/ Toe Board:
Both aluminum and steel planks can be manufactured in our factory.
6. Others
We can also manufacture fences, ladders, steel trays and othre related products that are needed in the erection of scaffolding.
Swivel coupler
1.joins scaffold tube having outside diameter of 48.3mm at any angle.
2.each half of the coupler is interconnected wih a swivel pin.
3.typically used for connecting bracing members.also used for tension splicing of scaffold tubes.
4.tightening nuts suit standard scaffold spanner.(23mm)
5.replaceable 't' bolts,nuts and washers.
6.robust design made from drop forged steel or pressed steel for durability and reliablity.
7.hot dip galvanized finished for corrosion resistance.
8.wll=6.25kn against slip at tightening torque of 54nm.
9.can be used to resist tension or compression loads in bracing.
German Swivel Coupler hot dip galvanized with flange nut:
 
Double coupler
1.join two scaffolding tubes having outside diameter of 48.3mm at right angles.
2.tightening nuts suit standard scaffold spanner
3.replaceable "t" bolts,nuts and washers.
4.robust design ade from drop forged steel or pressed steel for durability and reliability.
5.hot dip galvanized finish for corrosion resistance.
6.typical working load limit of 6.25kn against slip at tightening torque of 54nm.
7.can be used to resist tension or compression loads.